february 08, 2017 - European Space Agency
Friction-stir welded titanium tank tested by X-ray
FRICTION-STIR WELDED TITANIUM TANK TESTED BY X-RAY 8 February 2017 A section of titanium fuel tank for a satellite produced through a novel welding technique has been subjected to detailed X-ray analysis to check its robustness for use in orbit. ESA’s Materials and Electrical Components Lab used its X-ray goniometer to assess the residual stresses in the welds made by ‘friction-stir welding’ – cheaper, faster, greener and potentially stronger than traditional welding. “We’re shining a half-millimetre X-ray beam onto the surface of the weld and measuring how it is diffracted back,” explains metallurgist Adrian Graham. “We observe a distinctive conical reflection pattern, based on diffraction of the crystalline structure of the metal, but any displacement due to residual stress will distort this shape.” Friction-stir welded titanium tank Fuel tanks such as this are at the heart of satellites and launcher upper stages, essential to store the highly energetic – and often corrosive – propellants used to shift orientation and position in space. A mission without fuel is essentially uncontrollable. Last year, ESA worked with welding specialist TWI in the UK and Airbus Defence and Space to produce a titanium tank with friction-stir welding: a rotating tool was used to heat and soften the metal parts before mixing them together, like kneading dough, with no external heat source necessary. Because less energy is used, the welding process inflicts less residual stress on joints than standard ‘fusion welding’ – molten welds will pull on surrounding metal as they solidify. The result is that tanks made with friction stir welds will suffer less distortion, ending up with material performance comparable to unwelded metal. Friction-stir welding Friction-stir welding is today widely used to join aluminium components, but the reliable welding of titanium is a global first for the technique. “Because titanium is so strong and resistant, different pieces need to be forged and machined separately before being fusion-welded together,” explains project leader Andy Norman. “The result has excellent resilience but has a long lead time – up to 12 months. “Instead, the pieces of this tank could be cast directly from molten metal to nearer their final dimensions, with less follow-up machining. “Because friction-stir welds have less residual stress we still end up with comparable levels of performance, but manufactured in weeks rather than months.” This follow-up testing by the Mechanical and Electrical Components Lab at ESA’s technical centre in Noordwijk, the Netherlands, is seeking to quantify the resulting weld strength and develop validation standards for this process to aid its future adoption by the space industry. The results will be compared to previous material testing performed by the Agency’s new Advanced Manufacturing Lab at the Rutherford Appleton Laboratory (RAL) in Harwell, Oxfordshire, directly adjacent to ESA's own UK facility, which employed RAL’s ISIS neutron diffraction instrument. More traditional but destructive follow-up testing will also take place, involving drilling tiny holes around the welds to measure residual stress. X-ray goniometer “It’s not enough to demonstrate new processes for space – to help encourage their take-up, we also need practical, affordable ways of validating them,” adds Adrian. “By cross-comparing these results we should get an idea of the optimal validation method.” The project is supported through ESA’s General Support Technology Programme, bringing promising new technologies closer to the marketplace as part of the Agency’s Advanced Manufacturing cross-cutting initiative, helping the space sector to adopt novel production techniques. “Residual stresses are a ‘black beast’ for all mechanical engineers, involved in ensuring that a structure can sustain the loads applied to it,” comments Tommaso Ghidini, heading ESA’s Materials and Processes Section. “They are so dangerous because nobody can anticipate them precisely – but they are still there. “Now, using this technique, our laboratory can precisely measure any residual stresses in all of our spacecraft and launchers parts, supporting the performances, reliability and ultimate safety of all ESA missions.”
Friction-stir welded titanium tank
4928x3280, 3MB
Friction stir welding of titanium
3230x1633, 2MB
X-ray goniometer
4928x3280, 4MB
X-ray test of friction-stir welded tank
4928x3280, 4MB
Related news |
||
|
|
|
may 03, 2017
|
april 28, 2017
|
april 26, 2017
|
|
Bricks have been 3D printed out of simulated moondust using concentrated sunlight – proving in principle that future lunar colonis... |
Astronauts in space are valuable sources of scientific data. Researchers collect blood and urine samples to understand what effect... |
After nearly 13 years in orbit around Saturn, the international Cassini–Huygens mission is about to begin its final chapter: the s... |
Download all 
You might be interested in |
||
|
|
|
april 21, 2017
|
march 24, 2017
|
march 23, 2017
|
|
With more than 750 000 pieces of dangerous debris now orbiting Earth, the urgent need for coordinated international action to ensu... |
From 27 February to 17 March 2017, Aoife van Linden Tol, a multimedia artist working primarily with explosive media who is the rec... |
Press release available only in original language. Information from ESA’s magnetic field Swarm mission has led to the discovery of... |
Download all 
Share
Share via mail 
Automotive
Sport
Events
Art&Culture
Design
Fashion&Beauty
Food&Hospitality
Technology
Nautica
Racing
Excellence
Corporate
OffBeat
Green
Gift
Pop
Heritage
Entertainment
Health & Wellness